Filter
Top Products
Setting Up the TV
33
Setting Up the TV
KDX-46Q005
2-592-150-12(2)
Cable Box and
Antenna
For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑ You do not have a VCR. (If you have a VCR, see pages 37 and 38.)
With this connection you can:
❑
Use the TV’s remote control to change channels coming through the
cable box to the Media Receiver Unit’s cable input. (You must first
program the remote control for your specific cable box; see
“Programming the Remote Control” on page 64.)
❑ Use the TV’s remote control to change channels coming directly into
the Media Receiver Unit’s VHF/UHF input jack.
Notes on Using This Connection
Before connecting a cable
box, see “Using
CableCARD” on page 57.
✍ This connection will allow you to take advantage of dual picture features
such as Twin View, Freeze, etc.
IN OUT
CABLE
VHF/UHF
CATV cable
Rear of Media Receiver Unit
Cable box
Antenna Cable
Coaxial
cable
To Do This ... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable
box
Program the remote control. See “Programming the Remote
Control” on page 64.
Activate the remote control to operate the cable
box
Press FUNCTION repeatedly until the SAT/CABLE indicator lights
up.
Prevent the accidental switching of TV channels When using the cable box, the TV must stay on the channel the cable
box is set to (usually channel 3 or 4). You can use the TV’s Channel
Fix feature to lock in a specific channel. For details, see “Using the
Channel Menu” on page 119.
Switch
the TV’s input between the cable box and
cable
Press ANT to switch back and forth between the TV’s VHF/UHF
(scrambled channels) and CABLE (unscrambled) inputs.