Filter
Top Products
Other Information
141
Other Information
KDX-46Q005
2-592-150-12(2)
Channels
General
Switching the channel while
using the TV speakers as a
center speaker causes sound to
stop coming out of the TV
speakers
❏ This is because the program on the new channel does not have center-channel
sound. Switch the Center Speaker In option to Off (see page 115).
Switching the Center Speaker
In option to Off causes sound to
stop coming out of the TV
speakers
❏ Make sure to connect the audio output jacks on an audio device, such as a VCR or
a DVD player, to the audio input jacks on the media receiver unit. For the devices
that you wish to output sound from the TV speakers, connect them to the audio
input jacks as well as the video input jacks on the media receiver unit.
There is a whirring sound ❏ This is the sound of the internal fans of the display unit and the media receiver
unit. It is not a malfunction.
Problem Possible Remedies
Problem Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏ Press ANT to select the VHF/UHF input (see page 62).
❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 119).
TV is fixed to one channel ❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 119).
❏ Check your Channel Fix settings (see page 119).
Cannot receive any channels
when using cable TV
❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 119).
❏ Press ANT to select the CABLE input (see page 62).
Cannot receive or select
channels
❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in TV’s memory (see page 119).
Some digital cable channels are
not being displayed
❏ Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❏ The digital cable channel may be set to Hidden in the Channel menu (see page
120).
Problem Possible Remedies
How to reset TV to factory
settings
❏ Turn on the TV. While holding down the RESET button on the remote control,
press the POWER button on the Media Receiver Unit. (The TV will turn itself
off, then back on again.) Release the RESET button.
How to restore Video settings
to factory settings
❏ Press RESET on the remote control while in the Video menu (see page 110).
How to restore Audio settings
to factory settings
❏ Press RESET on the remote control while in the Audio menu (see page 114).
Cannot cycle through the other
video equipment connected to
the TV
❏ Be sure the Label Video Inputs option is not set to Skip (see page 125).
(Continued)