Filter
Top Products
Advanced Operation
Advanced Operation
25
The Features menu
1. Press the MENU button to display the main menu.
2. Press the v button to highlight the icon, then press the b button to enter the ‘Features’ menu.
3. ‘Auto Format’ is highlighted. Press the v or V button to highlight the feature you require then press
the b button to confirm. The table below explains each feature and it’s function.
4. Press the MENU button to remove the menu from the TV screen.
Feature How to use
Auto Format This feature can automatically detect the
type of screen format being transmitted
by the broadcaster. The options
available are:
Off: Picture size remains constant.
On: Picture size automatically changes
to the format being transmitted.
Press the V or v buttons to select ‘Off’ or ‘On’.
Format
Correction
When you are viewing 4:3 or 14:9
broadcasts there will be dark areas
visible at the edge of the screen. The
options available are:
Off: When viewing 4:3 and 14:9
broadcasts, dark areas are visible on the
TV screen.
On: When viewing 4:3 and 14:9
broadcasts the TV will automatically
switch to ‘Smart’ mode, therefore
eliminating any dark areas on the TV
screen.
Press the V or v buttons to select ‘Off’ or ‘On’.
Sleep Timer This feature allows you to set a period of
time after which the TV switches itself
into standby mode. This can be in 10
minute intervals up to a maximum of 90
minutes.
Press the V or v buttons to select the period of
time required.
AV3 Output This feature allows you to set which
signal source is output from the AV3
scart socket (labelled ) on the
rear of the TV. If you connect a VCR to
this socket, you can record from external
equipment connected to the other
sockets of the TV. The options available
are:
Ana. TV: Always outputs the analogue
TV signal.
Digi. TV: Always outputs the Digital TV
signal.
AV1: Outputs the signal from equipment
connected to the socket on the rear
of the TV.
AV2: Outputs the signal from equipment
connected to the socket on the
rear of the TV.
AV3: Outputs the signal from equipment
connected to the socket on
the rear of the TV.
AV4: Outputs the signal from equipment
connected to the socket on
the front of the TV.
Press the V or v buttons to select ‘Ana. TV’,
‘Digi. TV’, ‘AV1’, ‘AV2’, ‘AV3’ or ‘AV4’.
3/
s
3
1
2
3/
s
3
4/
s
4
VIDEO
/
TV
/
DIGITAL
O
K
DX100 Pages 21-30.fm Page 25 Tuesday, September 18, 2001 11:15 AM