Filter
Top Products
Additional Information
32 Additional Information
Connecting additional equipment
The following instruction explain how to connect a wide range of audio and video equipment to the rear of the TV.
1. Connect your equipment as shown in the above illustration.
2. Press the / button on the remote control until the correct symbol for your equipment appears
on the TV screen (see table below).
Note: To record and playback digital programmes you must connect your VCR to the C socket using a scart lead.
3. Switch on the connected equipment. The picture from this equipment (if any) will appear on the TV
screen.
4. Press the DIGITAL/ button to return to normal TV operation.
On Screen Symbol Input Signals
For equipment connected to socket A.
For equipment connected to socket B.
For equipment connected to socket C.
1
2
3
Connecting a Smartlink VCR
Smartlink is a direct link between the TV and VCR. For more information on Smartlink, please refer your
VCR instruction manual. Ensure that your Smartlink VCR is connected to the C socket, using a fully-
wired 21 pin Scart lead.
Connecting to external audio equipment
Connect your Hi-Fi system to the D sockets on the rear of the TV.
Connecting a Modem
Connect your Modem to the E socket and your telephone socket.
VIDEO
/
TV
/
DIGITAL
A
C
B
E
D
VCR
DVD
PlayStation
Hi-Fi
Modem
Note: Connecting cables are not supplied.
Rear of TV
DX100 Pages 31-36.fm Page 32 Tuesday, September 18, 2001 11:16 AM