Filter
Top Products
Getting Started
6 Getting Started
5. Automatically tuning the TV
Choosing the language.
Tuning the Digital channels.
VIDEO
/
TV
/
DIGITAL
O
K
1
2
3
6
5
4
7
8
9
0
Choosing the country.
The autotune prompt screen.
6. Watching a pre-recorded video tape
1. With a pre-recorded video tape inserted into your VCR, press the
‘PLAY’ button on the VCR. The TV automatically displays the video
picture (providing that you have used a fully wired 21 pin scart lead
to connect your VCR to the TV).
If the video picture does not automatically appear, press the /
button on the remote control repeatedly until the video picture is
displayed on the TV screen.
2. Press the DIGITAL/ button on the remote control to return to
normal TV mode.
Note: Alternatively, with the TV in analogue mode, press the PROG +/- buttons
on the remote control until the picture from the pre-recorded video tape
appears on the TV screen.
If you wish to move your video channel to a different channel number,
refer to the ‘Programme Sorting’ feature in ‘The Set Up menu’ section of
this instruction manual.
VIDEO
/
TV
/
DIGITAL
1. When you switch on the TV for the first time the Language/Country
menu appears on the TV screen with the word ‘English’ highlighted.
Press the V or v buttons on the remote control to choose your
required language. Press the OK button to confirm.
2. The word ‘Country’ is now highlighted. Press the V or v buttons on
the remote control to choose the country in which you are using this
TV. Press the OK button to confirm.
Note: The Digital features of this TV are designed for use in Great Britain only.
3. The autotune prompt screen appears. Press the OK button to select
‘Ye s ’. The autotune procedure begins, first tuning in all available
Digital channels.
As this may take some time, a display appears on the TV screen to
inform you of the tuning progress.
When all the available Digital channels are found, the analogue
tuning display appears and all the analogue channels are captured
and stored.
If no Digital and no analogue channels are found, a display appears
on the TV screen asking you to confirm your aerial is connected.
Check the aerial has been connected correctly then press the OK
button to repeat the tuning process.
Once all Digital and analogue channels have been captured and
stored, the TV returns to normal operation and displays the Digital
channel stored on channel number 1.
Note: If no Digital channels are captured, the analogue channel that is stored
on channel number 1 is displayed.
The TV has now tuned in all the
available channels and is ready for use
4. To view programmes, press the PROG+/- buttons or the numbered
buttons.
DX100 Pages 1-10.fm Page 6 Tuesday, September 18, 2001 11:12 AM