Filter
Top Products
42
ZWEITON (German stereo) system
When a stereo or bilingual ZWEITON based
programme is received, “STEREO” or
“BILINGUAL” appears in the front panel display.
NICAM system
When a stereo or bilingual NICAM based
programme is received, “NICAM” appears in the
front panel display.
To record a NICAM programme, be sure to set
“Audio” of “Channel Setting” in Settings Setup to
“NICAM” (default). If the sound is not clear when
listening to NICAM broadcasts, set “Audio” to
“Standard” (see “Channel Setting” on page 84).
z Hint
You can select the audio (main or sub) while recording
bilingual programmes using the (audio) button.
This does not affect the recorded sound.
Unrecordable pictures
Pictures with copy protection cannot be recorded
on this recorder.
When the recorder receives a copy guard signal,
the recorder continues to record but only a blank,
grey coloured screen will be recorded.
* The recorded disc can be played only on CPRM
compatible equipment (page 8).
Timer Recording (Standard/
VIDEO Plus+)
You can set the timer for a total of eight
programmes, up to one month in advance.
There are two methods to set the timer: the
standard method and VIDEO Plus+ method.
• Standard: Set the date, time, and programme
position of the programme manually.
• VIDEO Plus+: Enter the PlusCode number
designated for each TV programme (page 44).
Setting the timer manually
(Standard)
1 Press HDD or DVD.
If you select DVD, press Z (open/close) and
place a DVD on the disc tray. Press Z again
to close the disc tray.
Copy control
signals
Recordable discs
Copy-Free
Copy-Once
(Ver.1.1 with CPRM*)
Copy-Never None (a blank screen is
recorded)
+
RW
-
RW
VR
-
RW
Video
-
R
+
R
HDD
HDD
-
RW
VR
+
RW
-
RW
VR
-
RW
Video
-
R
+
R
HDD
1 2 3
4 5 6
7 8 9
0
</M/m/,,
ENTER
Z
[TIMER]
TOOLS
x REC
STOP
DVD
HDD
With the recording side facing down