Filter
Top Products
35
Hookups and Settings
11
Select “Next Screen,” and press
ENTER.
12
Select your country/region, and press
ENTER.
13
Select the desired programme
position using ./> or number
buttons.
14
Select “Channel” using M/m.
15
Select the external decoder
programme position using </,.
16
Select “Sound System” using M/m.
17
Press </, to select an available TV
system, B/G, D/K, I, or L.
To receive broadcasts in France, select
“L.”
18
Select “Decoder” using M/m.
19
Select “On” using </,, and press
ENTER.
To return to the previous step
Press O RETURN.
b Notes
• If you disconnect the recorder’s mains lead, you
will not be able to view the signals from the
connected decoder.
• To watch the connected external decoder (PAY-
TV/Canal Plus analogue decoder) programmes
during recording, press the PROGRAM + button
on the recorder (“SCART THRU” appears on the
front panel display). To return to the previous
display, press the PROGRAM – button on the
recorder (“SCART NORM” appears on the front
panel display). The recorder automatically
switches to the programme tuned by the
recorder’s tuner after the recording has finished.
To watch the connected external decoder (PAY-
TV/Canal Plus analogue decoder) programmes
while the recorder is in standby mode, set “Power
Save” to “Off” (default) in the “Basic” setup
(page 130).
Programme position