Filter
Top Products
56
3 Press the red button.
The date, start and stop times,
programme position, recording mode,
etc., settings appear.
• If you want to change the setting, press
</, to select the item and press M/m
to change the setting (page 54).
“EPG Link” (page 58)
“Series Recording” (page 57)
4 Select “OK,” and press ENTER.
• In case of a current TV/radio/data
broadcast timer setting, your recorder
will immediately start recording.
Your recorder will automatically begin
recording when the programme starts.
To modify the timer setting, see page 60.
Some examples of timer event icon
types are:
(red): Indicates that the whole
programme is set to be recorded.
(grey): Indicates that the programme
is set to be recorded using Series
Recording (page 57).
To scroll the EPG display by page (Page
mode)
Press PAGE +/– while the EPG display is
turned on to display the previous/next eight
channels.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
On-screen instructions may appear after
pressing x REC STOP. In this case, follow
the on-screen instructions.
If the timer settings overlap
See page 55.
To extend the recording duration time
while recording (only when “EPG Link” is
set to “Off”)
See page 54.
To confirm, change, or cancel timer
recording (only when “EPG Link” is set to
“Off”)
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” (page 60).
z Hint
The “Rec. Mode Adjust” function also works with
this timer method (page 55).
b Note
The EPG programme start and end time are
determined by the broadcaster.