Filter
Top Products
77
VCR Recording
To cancel the Quick Timer
Press z REC repeatedly until the counter appears
in the front panel display. The recorder returns to
normal recording mode.
To stop recording
Press x STOP twice.
Checking the remaining tape length
You can check recording information, such as
remaining tape length or recording mode, etc.
Press DISPLAY while recording.
The information display appears.
Press the button repeatedly to change the display
(page 74).
A Recording status
B Time counter
C Recording mode
D Remaining tape length
E Current channel
To check the remaining tape length, set “VCR
Function” – “Tape Length” of “Features” in the
“Setup” display correctly (page 102).
Notes
• The remaining tape length may not be indicated
accurately for short tapes such as T-20 or T-30, or tapes
recorded in LP mode.
• After DISPLAY is pressed, it may take one minute for
the remaining tape length to appear.
VCR Timer Recording
You can set the timer for a total of 12 programs
together with DVD and VCR timer recording, up
to one month in advance.
Follow the steps below to set each timer recording
items.
Note
Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent the
accurate recording of a program.
1 Press VIDEO to operate the VCR.
2 Insert a tape with its safety tab in place.
Record
0:30:00
SP
Rem 01:30
Ch 110
11 22 33
44 55 66
77 88
00
99
M/m/</,,
ENTER
SYSTEM
MENU
TIMER
x STOP
VIDEO
DIGITAL/
ANALOG
,continued