Filter
Top Products
23
2
3
4
6
1
Example: To program the
procedure above to the SYSTEM
CONTROL B button
1 While pressing COMMANDER
OFF, press the MORE button.
The SYSTEM CONTROL keys (A – C)
and number keys (1 – 9) flash while
the preset buttons stay lit.
2 Select the system number by
pressing the SYSTEM CONTROL
button (in this case, SYSTEM
CONTROL B) or the number key.
All the component names flash.
Preset programs for the SYSTEM
CONTROL A and C buttons
The SYSTEM CONTROL A and C
buttons are preset at the factory to
execute each program as follows.
SYSTEM CONTROL A button:
Turn off all the Sony components that
could receive the signal from the
Commander at the same time.
SYSTEM CONTROL C button:
Turn on all the Sony components that
could receive the signal from the
Commander at the same time.
Programming a series of
commands to the SYSTEM
CONTROL buttons
Continued