Filter
Top Products
15
GB
Operation
4 Touch to select the recorder component (MD/DAT
in this example).
When MD/DAT is touched, the REC EDIT operation
screen appears.
5 Touch r in RECORDER: MD/DAT, then touch ( in
PLAYER: CD.
Recording starts.
The FUNCTION screen returns once the recording
finishes.
To stop recording at any time
Although recording stops automatically in the above
example, recording can also be stopped at any time by
touching p in RECORDER.
To stop the recording procedure at any time
Touch FUNCTION to display the FUNCTION screen.
During steps 2 to 3, touching EXIT will also stop the
recording procedure.
This section describes how to record audio from a CD to
an MD as an example of recording audio/video.
Other operations
Recording from a DVD to a video deck is basically the same
procedure. For details on the buttons used in recording, refer to
the operating instructions supplied with the receiver/amplifier
and other components.
1 Touch FUNCTION.
The FUNCTION screen appears.
2 Touch .
The REC EDIT screen appears.
3 Touch to select the player component (CD in this
example).
Because CD is not displayed, Use the JOG DIAL or
touch $ to scroll downward through the list. If you
scroll to far, touch 4 to scroll back up.
When PLAYER is selected, the receiver/amplifier’s
function automatically switches to the PLAYER
component.
Touching 4 moves list up
Touching $ moves list down
PLAYER
Example: Recording from CD to MD
Starts playback from the CD player
Starts recording on the MD deck.