Filter
Top Products
27
GB
Operation
6 Select the MAKER.
Select the maker from the maker list.
The COMMAND list appears according to the maker
you selected.
7 Select the COMMAND.
Select the command you want to register.
The items selected in step 5 to 7 are registered in the
box selected in step 4.
The BOX Number list reappears.
z
To clear the programmed MACRO
Select the BOX Number of the MACRO you want to clear in step
4. Select “MACRO CLEAR” in the CATEGORY in step 5. The
items of the BOX are cleared.
z
To set “WAIT TIME”
Select the BOX Number of the MACRO you want to set the wait
time for in step 4. Select “WAIT TIME” in the CATEGORY in step
5.
The wait time list (1 to 10 second in 1 second increments)
appears. Select the time you want to delay. After you selected, the
BOX Number list reappears.
If you press ALL CLEAR on the receiver/amplifier, all the
registered MACRO programs are cleared.
4 Select the BOX Number.
Select the BOX Number you want to register the
command. You can program up to 10 commands in
one area.
The CATEGORY list appears.
5 Select the CATEGORY.
Select the component category for the BOX Number
you selected in step 4.
The MAKER list appears according to the category
you selected.
When the maker is Sony only, go to step 7.
You can select “WAIT TIME”other than audio
components as the CATEGORY.