Filter
Top Products
33
8 Press the SET button.
The display returns to the
previous one.
Notes
• If you set a TV or an amplifier for
volume control setting to the TV or
AMP label displayed by default, the
signal of the preset component will
be transmitted. If you programme
any signal for the 2 or % button of
each component by “learning”, the
learned signal programmed for each
component will be transmitted.
• Even if you preset another TV or
amplifier to a component label, when
the preset data of the TV or amplifier
for volume control setting to the TV
or AMP label displayed by default
will be not cleared, the signal of the
component preset by default will be
transmitted.
But if you set another TV or amplifier
for volume control setting, its signal
will be transmitted. In this case, its
learned signal will be transmitted if
you programme any signal for the 2
or % button.
• If a TV or an amplifier set for volume
control setting has no preset data for
the 2 or % button, the signal cannot
be transmitted.
• If you preset another category of
component than a TV or an amplifier
to the component label for which the
volume control setting has been
programmed, the signal of the 2 or
% button cannot be transmitted.
• When operating a component which
has no volume data, if you have
programmed any signal for its 2 or
% button of each component by
“learning”, the learned signal
programmed for the component is
transmitted even if you try to control
the volume using the volume control
function.
• When controlling the volume of the
audio components, the signal of the
2 or % button or the learned signal
of the 2 or % button for the
amplifier is transmitted.
• When controlling the volume of the
visual components, if a TV is set for
volume control setting, the signal of
the 2 or % button or the learned
signal of the 2 or % button for the
TV is transmitted.
• When controlling the volume of the
visual components, if an amplifier is
set for volume control setting, the
signal of the 2 or % button for the
amplifier is transmitted for the TV.
But if you programme any signal for
the 2 or % button of the TV, its
learned signal is transmitted for the
TV.