Filter
Top Products
56
Changing the programme
already set or changing
another programme that
you select
1 Follow Steps 1 - 4 on page
51- 52.
2 Select “COPY” by pressing
the Label Select button.
If you want to change the
programme already set, go to
Step 5 without pressing the
COPY key.
The programme numbers
appear. Numbers which have
the timer setting information
flashes. The others stay lit.
3 Press the SCROLL button
repeatedly until the
programme number (PROG
1- 12) of which the contents
you want to change
appears.
PROG4
ON/OFF
TEST
SETUP
COPY
SET
Setting the Timer (continued)
To change the name of the
Timer Macro labels on the
display
You can change the display of the
labels on the display to the most
suitable name using up to 8
characters or digits.
1 In Step 4 (page 52), select the
Timer Macro label of which
name you want to change (for
example, PROG4) by keeping
the Label Select button pressed
for more than 2 seconds.
The Commander enters the
Label Input mode.
2 Input the name of the label.
Follow Steps 3 - 5, on page 27 -
28.
3 Press the SET button.
The display goes to Step 5 on
page 52.
SET
TIMER
PROG4