Sony SLV-D950G DVD VCR Combo User Manual


 
filename[010BAS.fm] model name1[SLV-D950G/I] [3-084-915-11 (1) GB]
35
Playing a tape
Basic Operations
filename[Z:\2003 Combo G\3084915111\3084915111SLVD950G\010BAS.fm]
To resume normal playback
Press H.
To set the colour system
If the playback picture has no colour, or streaks appear during playback, set “Colour
System” in the “USER SET” menu to conform to the system that the tape was
recorded in (see page 104). (Normally set the option to “Auto”.)
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to “0:00:00”.
To display the counter on the TV screen, press DISPLAY during normal playback.
Tip
Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes during pause.
Notes
Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
The counter resets to “0:00:00” whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
Depending on your TV, the following may occur while playing an NTSC-recorded tape:
– The picture becomes black and white.
– The picture shakes.
–No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
When 10 hours have passed, the counter in the display window returns to “0:00:00” and the
count starts over again.
The sound is muted during playback at various speeds.
The picture may show noise when playing at high speed in reverse.
While playing a tape, you can display the setup menu, but the remote commander’s function
switches to DVD automatically. Press SET UP to exit the menu.
Stop disc playback while playing back a video.
The picture returns to normal playback from slow motion in reverse in 30 seconds.