Filter
Top Products
filename[010ADV.fm] model name1[SLV-D950G/I] [3-084-915-11 (1) GB]
55
A/V Receiver hookup
Advanced Hookups
filename[Z:\2003 Combo G\3084915111\3084915111SLVD950G\010ADV.fm]
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using and
.
∗ “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
and “DTS” to “On” in “AUDIO SETUP” menu (page 57). If your AV amplifier (receiver) has
an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” menu
(page 57). Otherwise, no sound or a loud noise will come from the speakers.
B-1
B-2
B-1
COAXIAL
OPTICAL
B-2
R
L
VIDEO
AUDIO
DIGITAL AUDIO OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Centre
[Speakers]
DVD-VCR
[Speakers]
Rear (L)
to coaxial or optical
digital input
and
Optical digital cord
(not supplied)
Remove jack cap
before connecting
l: Signal flow
Stereo audio cord
(supplied)
(red)(white)
to audio input
(white)
(red)
to OUT AUDIO L/R
or
to DIGITAL AUDIO
OUT (COAXIAL or
OPTICAL)
Coaxial digital cord
(not supplied)