Filter
Top Products
Getting Started
15
Connecting the VCR
filename[01GB04GET-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
Connection to your TV and Set-Top Box (STB)
If you don’t use a STB, skip to page 18.
If your STB has a Scart (EURO-AV) connector
The illustration below shows an example of connecting the STB to LINE-4 IN. In this case, set
the STB CONNECTION setting to LINE-4 (see page 26).
You can watch programmes from the Set-Top Box connected to this VCR on your TV even
when the VCR is turned off using the Line Through function. When you turn on the STB, this
VCR automatically sends the signal from the STB to the TV without turning itself on.
Note
• You cannot watch programmes from your STB on the TV while recording unless you record
a programme from your STB.
1
Connect the STB to the LINE-4IN connector as shown above.
2
Set POWER SAVE to OFF in the OTHER OPTIONS menu.
3
Turn off the VCR.
To watch a programme from the STB, turn on the STB and the TV.
For details, see page 26.
AERIAL
OUT
Scart cable (supplied with
the STB)
Scart cable (not supplied)
Aerial cable (supplied)
STB
STB controller
Side view
(supplied)
i
LINE-
1 (TV)
t
LINE
- 4 IN
STB Control
: Signal flow
Scart
(EURO-AV)
AERIAL
IN
AERIAL IN
continued