Filter
Top Products
Additional
Operations
61
Playing/searching at various speeds
filename[01GB06ADD-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There are two
ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode.
During playback or pause, turn the shuttle ring clockwise or anticlockwise. Each
change in the shuttle ring position changes the playback mode, and the corresponding
mark appears on the TV screen for a few seconds in the following way if the on-
screen display function is on :
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog
mode during any playback mode, the playback pauses so you can see a still picture.
Each change in the shuttle ring position shifts the picture one frame. To shift frames
in reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the
speed you turn the shuttle ring. To resume normal mode, press JOG again. The JOG
button turns off.
To resume normal playback
Press
H
(playback).
Tip
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both TRACKING buttons (+/–) at the same time.
Notes
• The playback sound is muted during the operations in the above table.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.
X2
X2
_
X1
_
Pause
Slow motion
in reverse
Normal speed
in reverse
Double speed
in reverse
High speed
in reverse
Slow motion
Normal speed
(Initial speed)
Double speed High speed
Playback mode:
Mark on the TV screen: