Filter
Top Products
Getting Started
27
Setting the Set-Top Box
filename[01GB04GET-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
Notes
• If your VCR is connected to the STB by the aerial cable, enter the programme number of the
VCR corresponding to the channel where you have set up the STB output in step 4.
• It is recommended to connect your STB to the LINE-4 connector.
• For some STB, in order to avoid any conflict between the STB controller and the VCR
remote commander, be careful not to point the remote commander towards the STB and the
VCR at the same time.
• You cannot watch programmes from your STB on the TV while recording unless you record
a programme from your STB.
4
• If you connect the STB using the aerial
cable :
Press CURSOR
M
/
m
/
<
/
,
to select RF
and press OK.
Press CURSOR
M
/
m
/
<
/
,
to highlight
PROGRAMME NO. and press OK. Enter
the appropriate number using CURSOR
M
/
m
and press OK.
• If you connect the STB using the Scart
(EURO-AV) cable :
Press CURSOR
M
/
m
/
<
/
,
to select
LINE-4 and press OK.
5
Press CURSOR
M
/
m
/
<
/
,
to highlight
TUNER BRAND NO. and press OK.
Enter the appropriate number using the
programme number buttons. Refer to the
table on the next page. Press OK.
Press MENU to exit the menu.
OK
CURSOR
SET :
SELECT :
OK
MENUEXIT :
SET - TOP BOX
STB CONNECTION
RF
RETURN
0 6
- - -TUNER BRAND NO .
PROGRAMME NO .
SET :
SELECT :
OK
MENUEXIT :
SET - TOP BOX
STB CONNECTION
LINE4
RETURN
- - -
TUNER BRAND NO.
123
456
789
0
OK
CURSOR
MENU
SET :
SELECT :
OK
MENUEXIT :
SET - TOP BOX
STB CONNECTION
RF
RETURN
0 6
1 2 3
PROGRAMME NO .
TUNER BRAND NO .
continued