Filter
Top Products
66
Checking/changing/cancelling timer settings
filename[01GB06ADD-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Tip
• In step 5 above, you can check the TIMER LIST by selecting LIST and pressing OK. Press
MENU to exit the TIMER LIST.
3
Press CURSOR
M
/
m
to highlight TIMER LIST,
then press OK:
• If you want to change or cancel a setting, go
on to the next step.
• If you do not need to change or cancel the
settings, press MENU, then turn off the VCR
to return to recording standby.
4
Press CURSOR
M
/
m
to select the setting you
want to change or cancel, then press OK.
The selected setting appears in the TIMER
menu.
5
• To change the setting, press CURSOR
<
/
,
to highlight the item you want
to change, and press CURSOR
M
/
m
to change it.
• To cancel the setting, press CLEAR.
6
Press MENU.
If any settings remain, turn off the VCR to return to recording standby.
MENUEXIT :
TIMER LIST
CANCEL
SET
:
:
SELECT :
OK
CLEAR
RETURN
DATE TIME PROG.
––: –– –:–– – ––– . ––
VPS
PDC
––: –– –:–– – ––– . ––
––: –– –:–– – ––– . ––
THU28.9
20:00 21:00
SPTODAY
AAB
20:00 21:00 AAB SP03.9
20:001:30
CDE LP.10
VPS
PDC
11
MON
14:00 15:00 LP– FRI FGH
SUN 6:30 7:00
LPIJK
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
2 . 10 DE10:00 11:30 C
SP VPS / PDC ON
THU28.9
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Programme 1
Programme 2