Filter
Top Products
12
Connecting the VCR
Getting Started
Step 3 : Connecting the VCR (continued)
Notes
• If the TV is connected to the LINE-1 (TV) connector, setting the RF MODULATOR in the
OTHER OPTIONS menu to OFF is recommended (initial setting). In the OFF position, only
the signal from the aerial is output through the AERIAL OUT connector (see page 73). You
do not have to tune your TV to the VCR. Skip “Tuning your TV to the VCR” on page 17.
• For correct connection of the SmartLink, please refer to your TV instruction manual.
3
Connect LINE-1 (TV) on the VCR
and the EURO-AV (Scart) connector
on the TV with the supplied EURO-
AV cable.
This connection improves picture and
sound quality.Whenever you want to
watch the VCR picture, press TV/
VIDEO to display the VIDEO
indicator in the display window. If
your TV does not have a EURO-AV
scart connector, see page 14.
4
Connect the mains lead to the mains.
LIGNE-1
(
TV
)
LINE-1
(
TV
)