Filter
Top Products
Getting Started
7
Setting up the remote commander
Getting Started
Notes
• In normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one together.
• Do not use different types of batteries together.
• Some buttons may not work with certain Sony TVs.
Setting the COMMAND MODE switch
To remote control the Sony VCR
with this remote commander, set
COMMAND MODE on the
remote commander to the same
position as the one on the VCR.
Usually, it is set to VTR3. Change
the position as shown below to
control other Sony VCRs :
VTR1:For Sony Betamax format
VCRs
VTR2 : For Sony 8mm format
VCRs
VTR3 : For Sony VHS format
VCRs
Switch to TV (Teletext off) (TV)
Switch to Teletext
(Teletext)
Select the sound AUDIO MONITOR
Use FASTEXT FASTEXT buttons
Call up on-screen display
DISPLAY
Change the Teletext page
/
Operate TV menu Menu buttons
Switch to/from wide mode of a Sony wide TV (For other
manufacture’s wide TV, see “Controlling other TVs with
the remote commander” below.)
WIDE
To Press
123
456
789
0
COMMAND
MODE
continued