Filter
Top Products
Basic Operations
46
Playing a tape
Playing a tape (continued)
Additional tasks
To set the colour system
If the playback picture has no colour or streaks appear during playback, set the
COLOUR SYSTEM option in the VIDEO OPTIONS menu to conform to the system
that the tape was recorded (see page 71).(Normally set the option to AUTO).
To play an NTSC-recorded tape
Set NTSC PB at the rear of the VCR according to the colour system of your TV.
To use the time counter
At the point on the tape that you want to find later, press CLEAR. The counter in the
display window resets to “0:00:00.” Search for the point afterwards by referring to
the counter.
To display the counter on the TV screen, press DISPLAY.
3
Press PLAY.
When the tape reaches the end, it will rewind automatically.
To Press
Stop play
STOP
Pause play
PAUSE
Resume play after pause
PAUSE or PLAY
Fast-forward the tape
FF during stop
Rewind the tape
REW during stop
Eject the tape
EJECT
When your TV is Set NTSC PB to
PAL only ON PAL TV
PAL and NTSC NTSC 4.43
PLAY
TV
STEREO
AUTO SET UP
LP
EP
SP
VIDEO
EDIT
NICAM
VPS
PDC
OPC
H M S