Filter
Top Products
SmartFile function
96
Registering the contents of a recorded tape in the SmartFile label
Registering the contents of a recorded
tape in the SmartFile label
The VCR will register programmes
recorded on a tape (even a non-SmartFile
recorded tape) in the memory of a new
SmartFile label by detecting the index
signals indicating the start of recorded
programmes. You can register up to the 12th
programme from the start of the tape. The
programmes appear from the bottom of the
screen as PROGRAM NO. 1, PROGRAM
NO.2, ... PROGRAM NO.12 in the order.
The 13th and subsequent programmes are
ignored. You can manually name the
registered programme numbers and select
the category (see page 88).
Before you start
…
• Turn on your TV and set it to the video channel.
• Turn on your VCR.
To stop registration to the SmartFile label
Press SMARTFILE GENERATOR.
The data registered before the button is pressed remains in the SmartFile label. You
can register the programmes again by pressing SMARTFILE GENERATOR.
SMARTFILE GENERATOR
g
1
Attach the SmartFile label to the spine of the
cassette as shown on the right and insert the
tape.
2
Press SMARTFILE GENERATOR on the VCR.
A message appears indicating that the recorded
programmes are being registered. The index
signals are detected from the start of the tape,
and the registration stops if the end of the tape is
reached. The message disappears when
registration is complete.
SMARTFILE SENSOR
ENDSTART
IN PROCESS
SMARTFILE INDEXING IS