Sony DHR-1000 VCR User Manual


 
28
Getting Started
If the clock is not activated
1 Follow steps 1 and 2 in “Using the
Auto Clock Set feature.”
2 Press the CURSOR (?//) buttons
to select OPTIONS in the AUTO
CLOCK SET menu, then press
EXECUTE.
The CLOCK SET CHANNEL menu
appears.
3 Press the CURSOR (?//) buttons
to select AUTO or MANUAL.
If you select AUTO:
The VCR automatically searches for a
channel that carries a time signal.
If you select MANUAL:
Set a channel that carries a time signal
using the number buttons.
Use this option if you know that
channel.
Most PBS member stations broadcast
a time signal.
For the fastest response, set the VCR
to your local PBS station.
4 Press EXECUTE.
The YOUR TIME ZONE AND
DAYLIGHT SAVING TIME menu
appears.
5 Press the CURSOR (?//) buttons
to select AUTO or MANUAL.
If you select AUTO:
The VCR automatically sets your time
zone and daylight saving time
(if applicable).
If you select MANUAL:
1 Press EXECUTE, then set the time
zone of your area using the
CURSOR (>/.) buttons.
2 Press EXECUTE, then select
STANDARD TIME or DAYLIGHT
SAVING TIME using the CURSOR
(>/.) buttons.
6 Press EXECUTE.
7 To activate the Auto Clock Set
function, turn the VCR off.
Note
If you use both the cable box
control feature and the Auto
Clock Set feature, the VCR
automatically changes
channels on the cable box
until a channel that carries a
time signal is found
whenever you turn off the
VCR.
If you want to stop the
search, change the channel
of the cable box with the
channel buttons either on
the VCR or on the remote
commander.
Setting the clock (continued)
MENU
EXECUTE
CURSOR