Filter
Top Products
Additional Operations
46
Playing stereo or bilingual programs
Press AUDIO MONITOR to select the desired sound. Each press of the
button changes the display on the VCR.
Playing the desired audio track
When listening to the tape on which commentary or background music
are recorded after, you can specify the playback audio tracks.
This function is available when playing back a tape recorded in 12-bit
audio recording mode.
For details, see page 84.
1 Press · PLAY.
2 Select the position corresponding to the desired audio tracks with
AUDIO MONITOR selector on the control panel.
• To listen to stereo 1 track: set to STEREO 1.
• To listen to stereo 2 track: set to STEREO 2.
• To listen to both stereo 1 and stereo 2 tracks: set to MIX.
You can adjust the audio balance between the stereo 1 track and
stereo 2 track by using the AUDIO MIX BALANCE control when you
select “MIX.”
Selecting the sound
AUDIO
MONITOR
AUDIO MONITOR selector
Notes
• When you connect the VCR
to the TV with only the
antenna cable, the sound is
always heard in mono.
• When you play back a tape
recorded in the 12 bit mode,
“STEREO 1” always appears
in the display window
regardless of the Audio
Monitor setting.