Filter
Top Products
22
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the
amplifier (receiver) has a digital input jack, use . When connecting to an MD deck or a DAT
deck, use . In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the connection only
N TVS STANDARD (page 51)
z
In connection
, you can use the supplied audio/video cord instead of using a separate audio cord.
z To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the connection.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
B
B-1
B-2
B-2
B-1
B-1
B-2
COAXIAL OPTICAL
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Y
SELECTABLE
INTERLACE
PROGRESSIVE
P
B
P
R
LINE OUT OUT
S VIDEO
VIDEO OUT
COMPONENT
SCAN SELECT
VIDEO OUT
B-2
B-1
VIDEO 1
R– AUDIO 2 – L VIDEO 2
LINE OUT
R– AUDIO 1 – L
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
l: Signal flow
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front
(L)
Front
(R)
[Speakers]
(white)
(red)
(white) (red)
Coaxial digital
cord (not supplied)
Stereo audio
cord
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
to coaxial or optical digital input to audio input