Filter
Top Products
72
Film based software conversion
Film shows an image by displaying an entire
image at 24 frames per second. When you
watch a film on television, the television
displays every other line of the frame as a
field, thus reducing information level and the
clarity of the film image.
This player solves this problem by increasing
the speed at which the frames are displayed,
consecutively showing 3 identical frames
followed by 2 identical frames in the time
that it normally takes to show 2 consecutive
frames. The end result is that the 24 frames
per second are increased to 60 frames per
second, which is the speed at which
Progressive video signals are shown.
This not only allows film to be shown in a
frame based format, it also increases the
clarity and sharpness which is unique to
Progressive format images.
Custom Settings (CUSTOM
SETUP)
Allows setting up Parental Control and other
settings.
Select “CUSTOM SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 67).
The default settings are underlined.
xAUTO PLAY
Select the Auto Play setting when you turn on
the player.
xDIMMER
Adjusts the lighting of the front panel display.
Converted progressive pictures
I
nter
l
ace p
i
ctures
Interlace pictures
Converted progressive pictures
OFF
Does not use “TIMER,”
“DEMO1,” or “DEMO2” to start
playback.
TIMER
Starts playing when the player is
turned on. The player can start
playback at any time when
connected to a timer (not supplied).
Set the timer when the player is in
standby mode (the power indicator
lights up in red).
DEMO1
Starts playing the first
demonstration automatically.
DEMO2
Starts playing the second
demonstration automatically.
BRIGHT
Makes the front panel display bright.
DARK
Makes the front panel display dark.
OFF
Turns off the lighting of the front
panel display.
CUSTOM SETUP
AUTO PLAY:
DIMMER:
PAUSE MODE:
OFF
BRIGHT
AUTO
TRACK SELECTION:
OFF
ON
PARENTAL CONTROL
PLAYBACK MEMORY: