Filter
Top Products
Settings and Adjustments
73
xPAUSE MODE (DVD only)
Selects the picture in pause mode.
x
PARENTAL CONTROL t (DVD only)
Set a password and playback limitation level
for DVDs with playback limitation for
children. For details, see “Limiting playback
by children (Parental Control)” (page 60).
xPLAYBACK MEMORY
The player can store the SUBTITLE and
other settings of each disc for up to 50 discs
(Playback Memory).
Set the Playback Memory function ON or
OFF.
The following settings are stored in memory
by the Playback Memory function.
— AUDIO (page 49)*
— BNR (page 55)
— DIGITAL VIDEO ENHANCER (page
58)
— SUBTITLE (page 54)*
— SURROUND (page 51)
— VIDEO EQUALIZER (page 56)
*DVD only
Notes
N
The player can store the settings of up to 50 discs.
When you store the setting of disc number 51, the
first disc setting is canceled.
N
Depending on the DVD, the information stored in
the disc takes priority over the Playback Memory
settings and the function does not work.
N
During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [/1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
xTRACK SELECTION (DVD only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD on which multiple audio
formats (PCM, DTS, or Dolby Digital
format) are recorded.
Notes
N
When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 68).
N
If you set “DTS” to “OFF” (page 75), the DTS sound
track is not played even if you set “TRACK
SELECTION” to “AUTO”.
N
If PCM, DTS, and Dolby Digital sound tracks have
the same number of channels, the player selects
PCM, DTS, and Dolby Digital sound tracks in this
order.
N
Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS or Dolby Digital
format by selecting “AUTO.”
AUTO
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select
this position.
FRAME
The picture, including subjects
that do not move dynamically, is
output in high resolution.
ON
Stores the settings in memory
when you eject the disc.
OFF
Does not store the settings in
memory.
OFF
No priority given.
AUTO
Priority given.