Filter
Top Products
43
Using the Features
Using the Features
Using the Remote Control
The following table describes the buttons on the remote control that are for
more advanced functions.
Button Descriptions
Outside Panel
Button Description
1 MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
2 SLEEP
Press repeatedly until the LCD projection TV displays the
time in minutes (15, 30, 45, 60, or 90) that you want the
LCD projection TV to remain on before shutting off
automatically. To cancel Sleep timer, press SLEEP
repeatedly until SLEEP OFF appears.
Pressing down
POWER
also cancels the Sleep timer and turns off
the power. While the Sleep feature is set, press once
to view the remaining time.
3 ANT Changes between the VHF/UHF input and the AUX input.
4 DISPLAY Press once to display the current time and channel label (if
set) and channel number. Press again to turn Display off.
See page 66 for details on setting the time.
5 JUMP Press to jump back and forth between two channels. The
LCD projection TV alternates between the current channel
and the last channel that was selected.
6 FREEZE Freezes the window picture. Press again to restore the
picture.
7 INDEX Press to enter the Scrolling Channel Index mode. You can
view and select from all receivable channels scrolling on
the screen without leaving the current one.
8 The joystick allows for movement of the on-screen cursor.
Pressing down on the center of the joystick selects the item.
9 VOL +/– Adjusts the volume.
q; PIC MODE Press repeatedly to step through the available video picture
modes: Vivid, Standard, Movie and Mild. Also available
in the Video menu. For details, see “Selecting Video
Options” on page 58.
(Continued)