Filter
Top Products
Using the Features
44
qa FAVORITES Displays the Favorite Channels list. For details, see “Using
Favorite Channels” on page 49.
qs RESET Press when in a menu to reset the settings to the factory
defaults.
qd POWER
buttons
(GREEN)
Turn on and off the LCD projection TV and other audio/
video equipment you have programmed into the remote
control. For instructions, see “Programming the Remote
Control” on page 77.
qf FUNCTION
buttons
Select the equipment (TV, SAT/CABLE) that you want to
operate. The indicator lights up momentarily when pushed
to show which device the remote control is operating.
qg TV/VIDEO
Cycles through the video equipment connected to your
LCD
projection TV
’s video inputs:
TV
,
VIDEO 1
,
VIDEO 2
,
VIDEO 3
,
VIDEO 4
,
VIDEO 5
and
VIDEO 6
.
qh 0 – 9 and
ENTER
Press 0 - 9 to select a channel, the channel changes after 2
seconds. Press ENTER to select immediately.
qj
GUIDE
Turns on/off Twin View. For details, see “Using Twin
View™” on page 50.
Displays the program guide of your satellite.
qk MENU Press to display the LCD projection TV on-screen menu.
Press again to exit from the menu.
ql CH +/– Scan through channels.
To scan rapidly through the channels, press and
hold down CH+ or CH–.
w; CINEMOTION Press to turn on and off the CineMotion mode. For details,
see “Using the Video Menu” on page 58.
wa WIDE MODE Press to step through the wide screen modes: Wide Zoom,
Normal, Full and Zoom. For details, see “Using Wide
Screen Mode” on page 56.
Button Description
z