Filter
Top Products
10
You can record programs by adding a VCR. You can also connect your
Digital Satellite Receiver to an audio system for enhanced sound
enjoyment.
VHF/UHF
VIDEO
L(MONO)
-AUDIO-
R
S VIDEO
IN
VIDEO
S VIDEO
AUDIO
LIN
E
IN
LIN
E
O
U
T
IN
O
U
T
ACCESS CARD
LOW
SPEED DATA
VCR CONTRO
L
DIGITAL
OUT
(OPTICAL)
SATELLITE IN
RF REMOTE
R
L(MONO)
VIDEO OUT
AUDIO
VIDEO
S VIDEO
CH3
CH4
VHF/UHF IN
VHF(SAT)/UHF
O
UT
TEL LINE
AC IN~
1
2
LIN
E
IN
L
IN
E
O
U
T
A
U
D
IO
OPTICAL
IN
If you have a
digital or Dolby
®
Digital audio
system (SAT-A50
only)
Connect the
DIGITAL OUT
(OPTICAL)ofthe
Digital Satellite
Receiver to the
optical digital
input ofyour audio
system.
z Tip
If you connect your
Digital Satellite
Receiver toa Dolby
Digital receiver, set
the Dolby Digital
optionofthe Audio
display to Auto
Select. See “Setting
Audio Options
(AUDIO)” on page
64 for more
information.
Audio Receiver
If you have a stereo
or Dolby Pro Logic
®
audio system
Connect the upper
AUDIO R and L(MONO)
jacks on the Digital
Satellite Receiver to the
audioinputsofyour
stereo amplifier.
If your TV and VCR have A/V
jacks
Connect theVIDEOOUT jacks of
your Digital Satellite Receiver to
the A/V input jacks of your VCR
using the supplied A/V cable.
Then, connect the A/V output
jacks of your VCR to the A/V
input jacks of your TV using an
A/V cable. (Be sure to match the
colors on the jacks with the
colored plugs on the A/V cable.)
If your TV and VCR have
S-Video jacks
Use the S-Video cable instead of
the yellow video connection.
z Tip
To allow your Digital Satellite
Receiver to control the recording
functions of your VCR, See “Step
5: Connecting the VCR
Controller” on page 11.
Stereo
Cable
Optical Cable
(SAT-A50 only)
(optional Sony
accessory POC-15A)
Digital Satellite Receiver
If your TV and VCR do
not have A/V jacks
Connect the VHF(SAT)/
UHF OUT jack on the
Digital Satellite Receiver to
the VHF/UHF input jack
on your VCR using coaxial
cable.
Then, connect the VHF/
UHFoutputjackonyour
VCR to the VHF/UHF
input jack onyour TVusing
coaxial cable.
Set the CH3/CH4 switchto
the channel that does not
carry off-air broadcasts in
your area.
Note
With this connection
your, input source is
channel 3 or channel 4
depending on how you
set the CH3/CH4 switch
on your VCR.
A/V Cable
VIDEO
(yellow)
OR
S-Video
S-Video
Cable
Coaxial
Cable
TV
1a
1a
1b
1b
2a
2a
2b
2b
2a 2b
2c
2c
VCR
2c
Step 4: Adding a VCR and Audio System