Filter
Top Products
Using the remote control 11
Using the remote control 3
This chapter explains how to:
• Use the RM-Y812 and RM-Y807 remote control functions. (see page 15)
• Install and replace the remote control batteries. (see page 15)
• Program the remote to work with your system components. (see page 16)
• Access interactive programming features. (see page 16)
12
13
14
17
21
11
15
16
20
CH
VOL
GUIDE
FAVORITEDISPLAY
JUMP
TV/VCR
FUNCTION
SAT
TVTV/VIDEO
TV
POWER
PAGE
SAT
MUTING
VCR
VCR
TV/SAT
SEARCHMENUEXIT
CODE SET
RM-Y812
SATELLITE
RECEIVER
0
12
8
3
456
79
7
8
6
5
9
4
3
2
1
10
19
18
SELECT
TV/VIDEO button - Switches between the
inputs of your TV. To operate your TV, you
must first set up the remote control
(see pages 15
–16).
2
TV/VCR button - Switches between the
inputs of your VCR. To operate your VCR,
you must first set up the remote control
(see pages 15
–16).
3
TV/SAT button - Switches your satellite
receiver output between regular TV and
satellite broadcasts. To receive regular TV
broadcasts, you must have a local TV
antenna or cable connection.
4
Subchannel button - Use with the 0-9
buttons to select digital video subchannels
(if available).
5
DISPLAY button - Displays information for
the current program.
6
EXIT button - Closes all on-screen displays.
7
JUMP button - Changes channels to the
previously tuned channel.
8
VOL button - Adjust the volume. To operate
your TV, you must first set up the remote
control (see pages 15
–16).
9
CODE SET button - Lets you program the
remote control to operate your TV and other
audio/video equipment (see pages 15–16).
10
MUTING button - Mutes the volume. Press
again to restore the volume. To operate your
TV, you must first set up the remote control
(see pages 15
–16).
1
POWER buttons - Turn on and off the
Satellite Receiver, TV, and VCR. To operate
your TV or VCR, you must first set up the
remote control (see pages 15
–16).
11
FUNCTION buttons - Select the equipment
(SAT,TV,VCR) that you want to operate. The
indicators light up to show which device the
remote control is operating.To operate your
TV or VCR, you must first set up the remote
control (see pages 15
–16).
12
VCR Control buttons - Operate VCR features
such as play, record, pause, stop, and fast wind.
To operate your VCR, you must first set up the
remote control (see pages 15
–16).
13
Continued on next page
RM-Y812