28 Using program guides
• Browse up or down one channel at a time with the navigation buttons when
the highlight is in the grid.
• Use the remote control CHANNEL (CH +/–) button to scroll through a full
page of guide entries at a time.
• Move the highlight to the right to show later time periods.
Turn off the Picture-In-Guide:
1. Press the remote control
GUIDE button.
2. Press the
GUIDE button again to access the Options menu tab.
Press the remote control GUIDE
button while the program guide
appears on-screen to display the
Guide Options menu.
3. Highlight the Picture-in-Guide menu button.
4. Press
SELECT to toggle the feature off.
Logo guide
• Select channels, rather than specific programs.
• The current program title appears above the logo grid as you highlight each
channel. Only current programming is available in the Logo Guide.
• Video of the current program appears in the Picture-in-Guide window as
you highlight each channel.
Use the
CHANNEL (CH +/–) button to scroll through the guide entries a full page
at a time, or use the navigation buttonsto scroll through the guide entries one at a
time. You can display the most channels per screen (refer to the figure below) by
turning off the Picture-in Guide feature, using the description-only mode.
Logo guide with Picture-In-Guide active
Logo guide with Picture-In-Guide disabled (description-only mode)
LOGO GUIDE
All Channels
Wed, Aug 1 10:54 PM
An image of the currently airing
program highlighted in the menu
selection appears here
A description of the program currently
airing on the highlighted network menu
appears here, if available.
Title of the program on the network selected in menu
LOGO GUIDE
All Channels
Fri, Jul 6 10:54AM
A description of the highlighted menu selection appears here, if available.
Title of the program on the network selected in menu