Filter
Top Products
TL H.264 DVR User’s Manual
44
5.1.2 Language
The Language item allows users to select the language for the OSD menu
and screen messages. Language selection takes effect immediately when the
selection is made. Press UP / DOWN to select from listed languages and
press ENTER to confirm.
5.1.3 Date / Time
Users can set the current date, time and other OSD parameters in this menu.
Login using account with proper privilege to enter the submenu. In System
Setup menu, select <Date/Time> and press ENTER. The Date/Time menu
displays as follows.
Date/Time
1. Date
2. Time
3. Time Zone
4. Date/Time Display
5. Date Display Mode
6. Time Display Mode
7. Date/Time Order
8. Daylight Saving Time Setup
9. Network Time Protocol Setup
2008/02/21
PM10:39:26
OFF
1 Row
Y/M/D
12 HR
Date First
NOTE: The reset of date / time setting only applies to new video. The
date and time of previously recorded video will not be changed.
NOTE: To avoid database corruption, formation of the database must
be done after changing Date/Time setting.
5.1.3.1 Date / Time
Select <Date> or <Time> and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field.