Filter
Top Products
TL H.264 DVR User’s Manual
78
5.8.3 Export Configuration
Users are allowed to save a DVR configuration by exporting it to an external
drive, such as an USB Flash Drive. Before exporting the configuration, make
sure the device in which the configuration will be saved is attached to the
DVR appropriately. Select <Export Config> from the Configuration menu and
press ENTER. The following menu is displayed. Items in this menu are
described in the following sections.
Export Config
1. Copy Destination
2. Config Name
3. Begin Export
No
5.8.3.1 Copy Destination
Enter this item to list available destinations (external storage devices) where
the configuration can be exported. Press UP/ DOWN to select a destination.
Please note that saving a different configuration to the same destination with
the same file name will overwrite the previous configuration file without
warning.
Copy Destination
Device Name
xxxx-xxxx
Select
No
NOTE: It is not allowed to select the built-in DVD+RW as a copy
destination.
5.8.3.2 Configuration Name
This item allows users to assign a name to the exported configuration file.
Use the virtual keyboard to enter the configuration file name. Note that the file
name can only contain up to 15 characters, with no spaces.
5.8.3.3 Begin Export
Select <Yes> to begin exporting the configuration file, or select <No> to exit.
NOTE: It is strongly recommended to export configuration before
upgrading the DVR system. Also, backup the configuration routinely is
recommended as well, just in case for unexpected situation.