Filter
Top Products
10-Pump, 80-Station Controller Chapter 8: Appendix 105
22. The RSView ME Station Startup Screen (Fig 25) will appear.
Fig 25
23. Verify that the circle next to “Run Current Application” is filled. If not, press the “On Startup
[F1]” button until the “Run Current Application” is filled.
24. Press the “OK [F7]” button.
25. The Startup Options Screen (Fig 24) will appear.
26. Press the “Close [F8]” button.
27. The Terminal Settings Menu (Fig 23) will appear.
28. Press the up arrow “▲” button to highlight “Networks and Communications”.
29. Press the enter “ ” button to select “Networks and Communications”.