Filter
Top Products
10-Pump, 80-Station Controller Chapter 8: Appendix 84
9. Go to the System Setup Screen (Fig 3) by pressing the System Setup button on any screen.
Fig 3
10. Go to the Save / Restore Screen (Fig 4) by pressing the Save / Restore button on the right side of
the screen.
Fig 4
11. Restore Settings by pressing the yellow Restore Settings button.
12. Wait for the “Restore Complete” message. (This message is only displayed for 10 seconds).
13. Remove compact flash card with the saved settings from the PLC CPU by pressing the retaining
clip to the right and pulling the compact flash card straight out.
14. Insert the operation compact flash card containing the new version of the software labeled PLC
Operate 744.00131.00 into the PLC CPU.