Filter
Top Products
10-Pump, 80-Station Controller Chapter 8: Appendix 111
45. After a short delay the Adapters Screen (Fig 31) will appear.
Fig 31
46. Press the “OK [F7]” button.
47. The Network Adaptors Screen will appear (Fig 28).
48. Press the “Close [F8]” button.
49. The Network Connections Menu will appear (Fig 27).
50. Press the “Close [F8]” button.
51. The Network and Communications Menu will appear (Fig 26).
52. Press the “Close [F8]” button.
53. The Terminal Settings Menu will appear (Fig 23).
54. Press the “Close [F8]” button.
55. The RSView ME Station Screen will appear (Fig 12).
56. Press the “Reset [F7]” button.