Filter
Top Products
1-2
S
UPERSERVER 6015T-T/6015T-INF User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6015T-T/6015T-INF lies two X7DBT-T/X7DBT-INF
dual processor serverboards, which are based on Intel's 5000P chipset. Below
are the main features of the X7DBT-T/X7DBT-INF. Note that the features on each
board are doubled for the server (see Appendix C).
Processors
Each X7DBT-T/X7DBT-INF supports dual Intel® Xeon® 5300/5100 Series proces-
sors. Please refer to our web site for a complete listing of supported processors
(www.supermicro.com).
Memory
The X7DBT-T/X7DBT-INF has eight 240-pin DIMM sockets that can support up to
32 GB of ECC FBD (Fully Buffered DIMM) DDR2-667/533 SDRAM. Memory can
be installed in both interleaved (dual-channel) and non-interleaved (single-channel)
confi gurations. All memory modules used to populate the system should be the
same size, type and speed.
Serial ATA
The South Bridge (ESB2) of the 5000P chipset includes a Serial ATA control-
ler for 3 Gb/s SATA drives. The hot-swappable SATA drives are connected to a
backplane that provides power, bus termination and confi guration settings. RAID
0 and 1 are supported.
PCI Expansion Slots
Each X7DBT-T/X7DBT-INF board has one PCI-Express x8 slot, so two PCI-Express
x8 slots are provided in the server. In the 6015T-T/6015T-INF server confi gura-
tion, riser cards have been pre-installed to support two low-profi le PCI-Express x8
add-on cards.
Ethernet Ports
Two Intel® 82563EB network controllers are integrated into the 5000P chipset on
each of the serverboards to support a total of four Gigabit LAN ports (100/1000Base-
T/1000BaseTX, RJ45 output).