![](http://pdfasset.owneriq.net/b/f4/bf4b768e-d006-5754-619f-8d5c2fde9a65/bf4b768e-d006-5754-619f-8d5c2fde9a65-bg3c.png)
6-4
S
UPERSERVER 6015T-T/6015T-INF User's Manual
Figure 6-3. Mounting a Drive in a Carrier
2. Installing/removing hot-swap SATA drives
The drive carriers are all easily accessible at the front of the chassis. These are
(with RAID enabled) hot-swap drives. To remove a carrier, push the release button
located beside the drive LEDs. Then swing the handle fully out and use it to pull
the unit straight out (see Figure 6-4).
Figure 6-4. Removing a SATA Drive