Filter
Top Products
CV0104DVR
25
SVAT ELECTRONICS
Now
You
Can
See
6. NETWORK REMOTE CONTROL
6. NETWORK REMOTE CONTROL
(OPTIONAL)
(OPTIONAL)
6.1 NETWORK DVR SETUP
Connect the RJ-45 cable to the network port on the back of the DVR, and the other end
to your router. Use IPEdit.exe to test the DVR. The network access software is not MAC
compatible. It is only compatible with a Windows PC running using the Internet Explorer
browser.
Note: Before using PPPoE and DDNS (recommended) connection method, you
must first setup an IP Address (using IPEDIT.exe).
6.1.1 ONLINE WITH DHCP SERVER
Use IPEDIT.exe to find the installed Network DVR. Select this Network DVR in the
Camera List Window. The default configuration will be shown on the right window.
Update the IP status.
Online with DHCP Server