Filter
Top Products
EN - 12 -
The unit clock must be set correctly so that VCR
timer recording is possible. It is suggested that the
clock be set manually when first setting up the unit,
then set to [ON] the Auto Clock setting which will
periodically correct the setting if necessary.
NOTES:
•
If you cannot receive a station with time signals,
Auto Clock setting cannot be performed. Use man-
ual setting only.
•
You must use the remote control to perform the
clock setting procedure.
MANUAL CLOCK SETTING
Make sure ...
•
The unit must be turned on.
In the example below, the clock is to be set to:
DATE May 4th, 2006
SETTING TIME 5:40PM
1 Select “SETTING CLOCK”
Press [MENU].
Use [PLAY/
KK
] or [STOP/
LL
] to
point to “SETTING CLOCK”, then
press [F.FWD/
BB
].
2 Select “MANUAL CLOCK SET”
Use [PLAY/
KK
] or [STOP/
LL
] to
point to “MANUAL CLOCK SET”,
then press [F.FWD/
BB
].
3 Select the month
Use [PLAY/
KK
] or [STOP/
LL
] until
your desired month appears.
(Example: May
→ “05”)
Then press
[F.FWD/
BB
].
4 Select the day
Use [PLAY/
KK
] or [STOP/
LL
] until
your desired day appears.
(Example: 4th → “04”)
Then press [F.FWD/
BB
].
5 Select the year
Use [PLAY/
KK
] or [STOP/
LL
] until
your desired year appears.
(Example: “2006”)
Then press [F.FWD/
BB
].
CLOCK SET UP
(AUTO / MANUAL)
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
B MANUAL CLOCK SET
D.S.T. [OFF]
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 04 THU 2 0 0 6
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / – – – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 4 – – – – – – –
HOUR MINUTE
– – : – – – –
PICTURE CONTROL
The unit’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
NOTE:
•
When setting the picture control, the Game mode
will be cancelled.
Make sure ...
•
The unit must be turned on.
1 Select “PICTURE CONTROL”
Press [MENU] on the remote control.
Use [PLAY/
KK
] or [STOP/
LL
] to
point to “PICTURE CONTROL”.
Then, press [F.FWD/
BB
].
2 Select item you want to adjust
Use [PLAY/
KK
] or [STOP/
LL
] until
desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
REW/s F.FWD/B
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
•
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
– M E N U –
TIMER PROGRAMMING
B PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
3 Adjust the picture control
Use [REW/
ss
] or [F.FWD/
BB
] to adjust to your
desired level within 5 seconds.
BRIGHT
–
PPPPPPPPPPPPPPCCPPPPPPPPPPPPPP
+