Filter
Top Products
2 Select your desired program position (1 to 8)
Use [PLAY/
KK
] or [STOP/
LL
] to
select the desired program position,
then press [F.FWD/
BB
].
3 Set the channel number
Use [PLAY/
KK
] or [STOP/
LL
] until
the desired channel number appears
(Example: CH61), then press
[F.FWD/
BB
].
NOTE:
•
If the unit is connected to a cable
box or satellite box, the unit must be on CH3 or
CH4, then the channel to be recorded is selected on
the cable box or satellite box.
4 Select once, everyday or weekly recording
For once recording :
Press [PLAY/
KK
] until the desired
date appears. (Example: “7/03”
for July 3rd)
Then press
[F.FWD/
BB
].
For everyday recording : To record a TV program at
the same time on the same channel
everyday. (Example: Monday
through Sunday)
Press [STOP/
LL
] until “EVRY
DAY” appears, then press
[F.FWD/
BB
].
For weekly recording : To record a
TV program at the same time on the
same channel every week. (Example:
every Monday)
Press [STOP/
LL
] until “EVRY”
and your desired day of the week
appear together, then press [F.FWD/
BB
].
5 Set beginning hour
Use [PLAY/
KK
] or [STOP/
LL
] until
the desired hour appears.
(Example: “ 7, PM” for 7:30PM)
Then press [F.FWD/
BB
].
6 Set beginning minute
Use [PLAY/
KK
] or [STOP/
LL
] until
the desired minute appears.
(Example: “30” for 7:30PM)
Then press [F.FWD/
BB
].
7 Set end hour
Use [PLAY/
KK
] or [STOP/
LL
] until
the desired hour appears.
(Example: “8, PM” for 8:50PM)
Then press [F.FWD/
BB
].
- 23 - EN- 23 - EN
TIMER RECORDING
You may set the unit to start and end a recording while
you are away. You can set 8 programs to record on spe-
cific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: July 3rd, 2006
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
•
If a cable box or satellite box is connected with the
unit you will be limited to record only one channel,
and the channel selector on the unit must be select-
ed to the output channel of the boxes CH3 or CH4
and then the actual channel to be recorded must be
selected on the boxes.
•
Clock must be set to the correct time and date
before setting the timer.
•
The unit must be turned on to program it.
•
Insert a cassette tape with its erase-prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)
•
The channel you want to record is properly set in
advance. (Refer to page 11.)
Avoid overlap of programs ...
There is a chance that a program will not be record-
ed, when programs overlap;
•
The program with an earlier start has priority.
•
Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
•
When the starting time is the same, the program set
on the highest position in the program list has pri-
ority.
•
The illustration below demonstrates the sequence
of recordings.
Program 1 10:00AM - 11:00AM
Program 2 9:00AM - 10:00AM
Program 3 9:30AM - 12:00PM
AUTOMATIC TIMER
RECORDING
9:00AM 10:00AM 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
1 Select “TIMER PROGRAMMING”
Press [MENU].
Confirm “TIMER PROGRAM-
MING” is pointed by pressing
[PLAY/
KK
], then press [F.FWD/
BB
].
•
If you have not yet set the clock,
“MANUAL CLOCK SET”
appears. If so, follow steps 3 to 8 on pages 12 and
13. Then set the timer recording.
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 EVRY DAY -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/03 MON -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 EVRY MON -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– M E N U –
B TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/03 MON 7:12
P
M
-:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/03 MON 7:30
P
M
-:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/03 MON 7:30
P
M
8:30
P
M
- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -