Symphonic SC1304 TV VCR Combo User Manual


 
- 21 - EN- 21 - EN
This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time will
not change on a blank tape or blank portions on the
tape.) The “–” indication will appear when the tape
has rewound further than “0:00:00” on the tape
counter.
SPECIAL FEATURES
REAL TIME TAPE COUNTER AUTO REWIND-EJECT
When the end of a tape is reached during record-
ing, playback or fast-forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the unit will eject the tape and turn itself
off.
This function is operative when Repeat Play is set
to [OFF].
The tape will not auto-rewind during timer record-
ing or One Touch Recording.
RECORDING
Make sure ...
The unit must be turned on.
Insert a cassette tape with its erase-prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
NOTE:
This unit will ONLY record and view the same channel.
You can ONL
Y
watch the same TV program that is
being recorded.
1 Select the channel to be recorded
Use the Number buttons or
[CHANNEL
KK
/
LL
].
NOTE:
If the unit is connected to a cable
box or satellite box, the unit must
be on CH3 or CH4, then the channel to be recorded
must be selected on the cable box or satellite box.
2 Select the tape speed
Press [SPEED] to select the desired
tape speed (SP/ SLP).
3 Begin recording
Press [RECORD].
4 Stop recording
Press [STOP/
LL
].
NORMAL RECORDING
Press [PAUSE/STILL F] to tem-
porarily stop recording.
Use
[PAUSE/STILL F] or
[RECORD] to resume recording.
NOTES:
After 5 minutes, the unit will automatically switch
to the Recording mode to prevent tape damage.
If Closed Caption mode is on, the On-Screen
Display will appear for 5 seconds, then disappear.
SKIPPING UNWANTED
SCENES DURING RECORDING
SP
REC
SP
PAUSE
SP
CH 10