Tascam DR-70D VCR User Manual


 
TASCAM DR-70D
17
3 – Preparation
Setting the inputs
Recording with the built-in stereo mic
Point the built-in stereo mic at the sound source and place the
unit in a stable location where there is little vibration.
Connecting microphones
Connect microphones to this unit’s 1/L, 2/R, 3/L and/or 4/R
connectors.
Point the mics at the sound source and place the unit in a stable
location where there is little vibration.
Mic
Mic
Mic
Stereo microphone
Mic
Recording an external device (LINE IN)
Use stereo plug cables to connect to the output of an external
audio device.
Audio equipment or other external device
CAUTION
Reduce the output level of the external audio device if the
input sound is distorted even after adjusting the input gain
level of the unit.
Controlling the gain level might not be possible if an
external audio device with a fixed output line level is
connected and overloads might occur because of exces-
sively loud input signals. In such cases, use the headphone
jack or other level-controllable output for connection to the
unit.
Using the top panel accessory shoe
To use the accessory shoe on the top panel, remove the DSLR
attachment bracket.
You can attach the included camera attachment bracket screw
hole covers to the screw holes.