Filter
Top Products
1.4.2
INSTALLATION OF BATTERIES
1.4.3 EFFECTIVELY USING THE
REMOTE CONTROLLER
1. Open the battery compartment cover.
NOTE:
•
•
•
•
NOTE:
•
•
9
2. Install two Size AA batteries in correct
direction.
3. Close the battery cover.
The life time of the batteries may last up
to one year, depending on how often the
remote controller is used. For the best
performance, the batteries should be
replaced on a yearly basis, or when remote
operation became erratic.
Be sure to place the batteries in the correct
direction, as shown left.
Do not mix old and new batteries, or different
types.
Old batteries may leak chemical and damage
the remote controller. Always remove batteries
as soon as they become weak.
Point the remote toward the infra-red remote
sensor on the main unit.
If direct sunlight, incandescent light, or
any other strong light sources hit the
remote controller sensor, the remote
controller may not operate properly.
If there is an obstacle between the main
unit and the remote controller, the remote
controller signal may not be received.