Filter
Top Products
Remote Control Unit
The provided Remote Control Unit allows the unit to
be operated from a distance.
When operating the remote control unit, point it
towards the remote sensor on the front panel of the
unit.
<
Even if the remote control unit is operated within
the effective range (5m), remote control operation
may be impossible if there are any obstacles
between the unit and the remote control.
<
If the remote control unit is operated near other
products which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly. Conversely,
the other products may operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two ‘AAA’ (R03 or UM-4) dry batteries. Make
sure that the batteries are inserted with their
positive ‘+
’ and negative ‘_’ poles positioned
correctly.
3. Close the cover.
Battery Replacement
If the distance required between the remote control
unit and main unit decreases, the batteries are
exhausted. In this case replace the batteries with
new ones.
Precautions concerning batteries
<
Be sure to insert the batteries with correct positive
‘+
’ and negative ‘_’ polarities.
<
Use batteries of the same type. Never use different
types of batteries together.
< Rechargeable and non-rechargeable batteries can
be used. Refer to the precautions on their labels.
< When the remote control unit is not to be used for
a long time (more than a month), remove the
batteries from the remote control unit to prevent
them from leaking. If they leak, wipe away the
liquid inside the battery compartment and replace
the batteries with new ones.
<
Do not heat or disassemble batteries and never
dispose of old batteries by throwing them in a fire.
9