Filter
Top Products
DVD Player DVDFAW08
28
Default
This menu allows you to reset the DVD
player to the default factory settings.
NOTE: It does not change the Password or
Parental Control settings.
HELP AND ADVICE
Problem Probable cause
The DVD player will
not power up.
Ensure that the plug is connected to the mains socket and switched on.
Replace the fuse in the plug.
Disc does not play. Check that the disc has been correctly loaded, label facing up.
Check that the format of the disc is supported. If it is a DVD disc, ensure
that it is Region 2.
No picture. Ensure that the DVD player and TV are powered on.
Check that the cables are fi tted securely.
Ensure that the TV has the AV channel or equivalent selected.
Try a DVD disc that you know plays.
No sound. Check that the volume has not been set low on the TV.
Check that the volume has not been muted on either the TV or DVD
player.
Check that the cables are fi tted securely.
The picture quality is
poor.
Check that the disc surface has not been damaged.
Try cleaning the disc.
Check that the cables are fi tted securely.
Some functions do
not work (e.g. Angle,
Search etc.)
Refer to the DVD packaging. Not all functions are available.
No response to Remote
Control.
Remote Control not aimed correctly.
The Remote Control Sensor is obstructed.
Remote Control batteries inserted incorrectly.
Remote Control batteries exhausted.
If none of the above suggestions seem to work, try switching your DVD player off and then on
again. If this does not work, contact either your supplier or a qualifi ed repair technician. Never
attempt to repair your DVD player yourself.
Tesco Electrical Helpline: 0845 456 6767
Default
Default
Restore Default
: Select
Technika DVDFAW08 1B V01.indd Sec1:28Technika DVDFAW08 1B V01.indd Sec1:28 23/07/2008 14:44:3223/07/2008 14:44:32