Technika STBHDIS2010 DVR User Manual


 
23
Factory reset
You can restore the default settings for your
box to the original factory values:
1. Press the MENU button.
2. Press the
button to select the ‘Install’
option.
3. Press the
and
buttons to select the
‘Factory Reset’ option.
4. Press OK to begin.
5. You are asked to conrm that you want to
proceed. Press the OK or BACK button if
you do not want to re-tune, otherwise
Note: You should re-tune your box
if you move home.
Note: You should re-tune your box
periodically because new channels
may become available.
CAUTION: RETURNING THE
BOX TO ITS FACTORY DEFAULT
CLEARS ALL SETTINGS.
THE PIN IS RESTORED TO THE
DEFAULT ‘0000’ VALUE
Note: To prevent accidental
erasure,factory reset does not
reset the Channel Zero settings in
your box.
To perform a full reset that includes
also the Channel Zero settings,
press the following sequence of
buttons: MENU, 2, 7, 1, 8, 2, 8, 4,
5, 9, 0.
The box will go into standby
automatically
Operating the box
3. Press the OK button to begin.
4. You are asked to conrm whether you
want to proceed. Press the OK or BACK
button if you do not want to re-tune,
otherwise press
and then OK to
conrm.
5. The box searches for and displays all the
available TV and radio channels.
6. Once the automatic search has been
completed, all channels are stored and the
rst available channel is shown.
Version
The Version menu shows hardware and
software information.
To see the version number:
1. Press the MENU button, then press the
/
/
and
buttons to navigate to
press
and then OK to conrm.
Once the "OK" button press, a password
require dialog display, enter the correct
password to perform the factory reset (default
password is 0000).